Relay receiver with 2 channels and 3 operating modes in the same device.

1. Momentary: While you hold pressing the button, the output will be activated. On the other hand, when you release the button, the output will be deactivated .
2. Toggle: When you press the button, the output will be activated and it'll remain until you press the SAME button.
3. Interlock : It only works with remote controls with 2 or more channels. When you press the button of the remote control, the output will be activated. Output will deactivate when you press a DIFFERENT button of the remote. For example in a remote with two channels, one button might activate a circuit and the other one might deactivate it.

You can choose one of these three modes by using a jumper on the receiver.

With the technology LEARNING CODE, it's much easier to synchronize up to 20 remote controls! Just hold pressing the button of the receiver and at the same time the button of remote that we'd like to synchronize.

Welding isn't needed. Easy and quick to operate.

A case box is included to protect the circuit.

• Channels: 2 channels
• Output: Relay
• Voltage: 9-12V
• Consumption:
  • Standby: 8mA (9V) / 10mA (12V)
  • 1 activated relay: 30mA (9V) / 40mA (12V)
  • 2 activated relays: 50mA (9V) / 70mA (12V)
• Frequency: 315Mhz
• Code: Learning (it works with remotes with fixed and learning code)

This receiver doesn't include remote controls. Pick the one you need in section remote controls.