Digital Receiver with 4 channels and 3 operating modes.

1. Momentary: While you hold pressing the button, the output will be activated. On the other hand, when you release the button, the output will be deactivated .
2. Toggle: When you press the button, the output will be activated and it'll remain until you press the SAME button.
3. Interlock : It only works with remote controls with 2 or more channels. When you press the button of the remote control, the output will be activated. Output will deactivate when you press a DIFFERENT button of the remote. For example in a remote with two channels, one button might activate a circuit and the other one might deactivate it.

This product comes preconfigured on MOMENTARY mode, but can be changed at any time. To change the working mode you need to make an electronic soldering on the board, as explained on the instructions. If you want to avoid making this yourself, choose the preferred working mode so we can send it configured according to your needs.

With the technology LEARNING CODE, it's much easier to synchronize. Just hold pressing the button of the receiver and at the same time the button of remote that we'd like to synchronize.

Welding isn't needed. Easy and quick to operate.

• Channels: 4 channels
• Output: Digital
• Power supply voltage: 3.5 to 5.5V
• Consumption: 2.5 to 2.8mA
• Output voltage: Same input voltage
• Maximum output current: 5mA per channel
• Frequency: 315Mhz
• Code: Learning (it works with remotes with fixed and learning code)
• Size of the circuit: 30 x 12 x 5mm

With each digital output, you can activate a transistor, energy-efficient LED, microcontroller or Arduino input, etc.